Where LEGO Makes Its Bricks and Why Its Network Is Changing

Where LEGO Makes Its Bricks and Why Its Network Is Changing

In September 2026, the LEGO Group announced plans to invest more than $400 million in expanding its factory in Monterrey, Mexico. At the same time, construction is progressing on a new manufacturing site in Virginia, which is expected to open in 2027. Both investments are part of a long-standing strategy to produce LEGO products closer to the markets where they are sold.

Today, LEGO manufacturing spans six factories in Denmark, Czechia, Hungary, Mexico, China and Vietnam. Behind the familiar plastic bricks is a network of facilities with different responsibilities, from precision moulding to decorating individual elements and packing complete sets. Understanding how these operations fit together helps explain why LEGO continues to invest in regional production capacity while maintaining common manufacturing standards around the world.

Where Are LEGO Bricks Made Today?

LEGO currently operates factories in Billund, Denmark; Kladno, Czechia; Nyíregyháza, Hungary; Monterrey, Mexico; Jiaxing, China; and southern Vietnam. The Vietnamese factory, inaugurated in April 2025, is the newest addition. According to the company’s manufacturing network overview, a seventh factory is under construction in the United States.

World map showing LEGO's six operational factories and the planned Virginia factory, with markers identifying their different manufacturing functions.

LEGO’s manufacturing network comprises six operational factories with different production responsibilities. A seventh factory in Virginia is scheduled to open in 2027. Source: LEGO Group disclosures; ATSC illustration.

These facilities do not all perform the same functions. LEGO’s 2025 Modern Slavery Statement identifies Billund primarily as a moulding operation, where plastic elements are produced. Kladno concentrates on processing and packing, while the factories in Hungary, Mexico, China and Vietnam combine moulding with subsequent production and packaging activities.

The distinction matters when asking where a LEGO set is made. Individual elements and finished boxes represent different stages of manufacturing, and the location where a set is packed does not necessarily identify where all its components were produced.

Virginia adds another complication to the factory count. LEGO already operates a temporary packing facility in Colonial Heights, but its permanent manufacturing site in Chester is still scheduled to begin production in 2027. Until then, the company has six operational factories.

From Plastic Granules to a Boxed LEGO Set

The journey of a LEGO brick begins with raw materials supplied to the manufacturing network. Plastic resin is processed through precision moulding, in which heated material is injected into specially designed moulds to produce individual elements. The apparent simplicity of a finished brick conceals demanding manufacturing requirements: parts made at different times and in different factories must fit together consistently.

Moulding is only one stage. Depending on the product, elements may subsequently be decorated, printed or combined with other components. Minifigures, for example, require several individual parts and additional processing before they are ready to be included in a set.

LEGO’s Kladno factory in Czechia provides a particularly useful example of this division of labour. The facility decorates elements, assembles minifigures and other components, and prepares products for final packaging. Its packing operations first group the required elements into smaller bags, or prepacks, which are then combined with building instructions and placed into the finished boxes.

This introduces a different type of manufacturing challenge. A set containing hundreds of individual parts must have the correct assortment, quantities and instructions. Producing every component to the required standard is of limited value if the final package is incomplete.

Maintaining consistent standards across the network also requires common manufacturing expertise. In June 2026, LEGO opened its Kornmarken manufacturing innovation centre in Billund, where engineers develop and test technologies intended for use across its factories. The centre illustrates how manufacturing development can remain concentrated in one location even as production capacity expands internationally.

Why LEGO Makes Products Close to Major Markets

LEGO’s regional manufacturing strategy has been developing for more than a decade. Rather than relying on one production country to supply customers worldwide, the company operates factories across Europe, the Americas and Asia, supported by regional distribution infrastructure.

The operational rationale is straightforward. Manufacturing closer to major consumer markets can reduce the distance finished products need to travel and potentially shorten replenishment times. It may also give the company more flexibility when demand changes or international transportation becomes unreliable. These are benefits LEGO identifies in explaining its investments, although their actual impact depends on the products and routes involved.

Demand and product variety make this flexibility particularly important. LEGO’s 2025 Annual Report recorded a portfolio of 868 products, approximately half of which were new. In the first half of 2026, revenue increased by 21% compared with the previous year.

Such a portfolio requires more than sufficient overall manufacturing capacity. Different sets depend on different combinations of elements, decorations and packaging materials. A factory network must therefore coordinate what is produced, in what quantities and at which stages, while accommodating changes in demand across markets.

Regional production can make that task easier in some respects, particularly for final manufacturing and distribution. However, raw materials, specialised components and equipment may still cross international borders. A factory located close to consumers does not necessarily operate within a self-contained regional supply chain.

Vietnam Adds Manufacturing and Distribution Capacity in Asia

LEGO’s expansion in Vietnam illustrates how manufacturing and logistics investments can reinforce each other. The company opened its sixth factory in southern Vietnam in April 2025, adding capacity alongside its existing operation in Jiaxing, China.

The investment followed LEGO’s established regional strategy. As Reuters reported at the factory’s opening, the company was seeking to bring production closer to growing consumer markets in Asia-Pacific.

Manufacturing capacity alone would not achieve that objective without corresponding distribution capabilities. In 2025, LEGO and logistics provider Kuehne+Nagel also opened a regional distribution centre in Dong Nai, Vietnam.

According to Kuehne+Nagel’s description of the operation, the centre handles products originating from both LEGO’s Vietnamese factory and mainland China. Its responsibilities include customs clearance, bonded warehousing, sea freight and deliveries to local distribution centres across the region. Initial destination markets included Australia, New Zealand, Malaysia, Singapore and Japan, with further markets planned.

The arrangement demonstrates why the geography of a manufacturing network cannot be understood from factory locations alone. The Vietnamese distribution centre connects production from more than one country with several downstream markets. It provides additional options for organising regional shipments without eliminating the need for international transport.

Mexico and Virginia Are Reshaping the Americas Network

In the Americas, LEGO is pursuing a different combination of established and new manufacturing capacity. Its Monterrey factory has operated since 2008 and has undergone several expansions to accommodate growing demand.

An earlier packaging and warehousing project was completed in 2026. This is separate from the investment announced in September 2026, which will add approximately 62,000 square metres of facilities, including a new packing hall and an automated high-bay warehouse. LEGO expects the project to increase the site’s total production capacity by 35%, with construction scheduled between 2027 and 2029.

As Manufacturing Dive reported, the investment places considerable emphasis on packaging and warehousing capabilities. This reflects the importance of the later manufacturing stages: expanding moulding output is of limited benefit unless processing, packing and internal logistics can accommodate the additional volume.

Meanwhile, LEGO is investing more than $1.5 billion in a new manufacturing and distribution complex in Virginia. The permanent factory is expected to begin production in 2027, alongside a separately planned regional distribution centre. The temporary packing operation already active in Virginia provides some local capacity before the new facilities are completed.

The American investment does not represent a withdrawal from Mexico. On the contrary, LEGO is increasing capacity in both countries. Once Virginia becomes operational, the company will have two manufacturing factories in the Americas, creating more options for regional production and distribution.

The Trade-Offs Behind a Regional Factory Network

The expansion of LEGO’s manufacturing footprint offers potential advantages, but operating a greater number of factories also increases the need for coordination. Each location requires equipment, skilled employees, reliable material supplies and production planning. Investment decisions must account for differences in demand, operating costs and the capabilities already available elsewhere in the network.

The scale of these commitments is considerable. In addition to its projects in Vietnam, Mexico and Virginia, LEGO completed an expansion in Hungary that increased the factory’s production capacity by 30% in 2025. Such investments provide room for growth, but they also create substantial fixed assets that must be utilised effectively over time.

There are environmental considerations as well. LEGO associates its regional production approach with reducing the impact of transporting products. Shorter delivery distances can contribute to that objective, but overall emissions also depend on transport modes, factory energy use, materials and the wider supply chain. The company has not publicly demonstrated that every regional expansion produces a measurable reduction in total logistics costs or emissions.

LEGO’s experience illustrates the complexity of combining a global product standard with geographically distributed manufacturing. The company is gradually increasing its ability to produce and distribute goods within major regions, while retaining a network in which specialised operations, suppliers and logistics providers remain interconnected. As its latest investments come into operation, managing those relationships will be as important as the additional production capacity itself.

Facebook
X
LinkedIn
Email
WhatsApp